Forte EX MT, "grinding" through gears - Kia Forte Forum : Sedan / Koup / Forte5 Forums
» Auto Insurance
» Featured Product

ForteForums.com is the premier Kia Forte Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 10-26-2011, 08:04 PM   #1 (permalink)
Junior Member
 
Join Date: Aug 2010
Posts: 19
Default Forte EX MT, "grinding" through gears

i have a 2010 kia forte ex manual transmission and when im driving on either 1st or 2nd gear and it RPM's at 4000 or just above it makes like a grinding noise. i took it to dealer and they say that its normal on forte manuals. that its the noise... its rather annoying switching from 2nd to 3rd. once rpm is 4000 and i push clutch or let go of throttle it grinds. makes a loud noise.
wpicado is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 10-26-2011, 08:47 PM   #2 (permalink)
Senior Member
 
MFury's Avatar
 
Join Date: Dec 2009
Location: Edmonton, Alberta
Posts: 1,699
Garage
Default

My 2010 Koup EX 5 speed manual is fine and quiet when shifting at low rpms or high rpms. I get a clack noise once in awhile when I shove into into gear but thats about it for noise.
__________________
2010 Racing Red EX Koup MT
MFury is online now   Reply With Quote
Old 10-26-2011, 08:49 PM   #3 (permalink)
Senior Member
 
MFury's Avatar
 
Join Date: Dec 2009
Location: Edmonton, Alberta
Posts: 1,699
Garage
Default

Does it make any noise in neutral at stop when you rev it around those rpms?
__________________
2010 Racing Red EX Koup MT
MFury is online now   Reply With Quote
Old 10-26-2011, 08:58 PM   #4 (permalink)
Senior Member
 
trevorusn's Avatar
 
Join Date: Apr 2010
Location: Milford, NH
Posts: 1,713
Default

Funny, I have the same problem on my 6sp on my '10 SX. When above 4000 RPM, and I go to shift from 2nd to 3rd, it sometimes refuses to let me engage third after one or two attempts before finally engaging. I find this very odd...
__________________
Blue Koup SX 6MT
Road Race Motorsports Mid-Ram Intake
Road Race Motorsports Lightweight Pulley
SOLO HFC
ARK dt-s cat-back exhaust
trevorusn is offline   Reply With Quote
Old 10-27-2011, 03:53 AM   #5 (permalink)
Junior Member
 
Join Date: Aug 2010
Posts: 19
Default

Quote:
Originally Posted by MFury View Post
Does it make any noise in neutral at stop when you rev it around those rpms?

hmm, i have not tried that method, but i believe it does not do it when in neutral. but i will test it when not moving, and i will disengage the gear and rev it while actually moving... and report the results
wpicado is offline   Reply With Quote
Old 10-27-2011, 03:56 AM   #6 (permalink)
Junior Member
 
Join Date: Aug 2010
Posts: 19
Default

Quote:
Originally Posted by trevorusn View Post
Funny, I have the same problem on my 6sp on my '10 SX. When above 4000 RPM, and I go to shift from 2nd to 3rd, it sometimes refuses to let me engage third after one or two attempts before finally engaging. I find this very odd...

the gears dont get stuck when switching. i think only one that gives me alot of issue is the reverse gear. sometimes it doesnt catch the gear and thats when it grinds and you feel it. but when im in second, and i rev up to 4000rpm i push clutch in or just let go of throttle and i will hear a "krrrrrrrr" like scratching grinding noise but i dont physically feel anything grind and i can still easily engage the gears and not have them get stuck.. only time i know they are forced in is when i redline car...
wpicado is offline   Reply With Quote
Old 12-01-2011, 10:03 AM   #7 (permalink)
Junior Member
 
Join Date: Sep 2010
Posts: 1
Default

Saturday my 2010 Kia Forte Koup EX MT, started grinding 3rd gear. It's almost as if I am not using the clutch and pushing the shifter to try and force it in. It does it shifting up from 2nd to 3rd and also downshifting from 4th to 3rd. It is in the shop this morning being looked at....I hope it isn't a long repair.
RockStizzle is offline   Reply With Quote
Old 01-26-2012, 08:11 PM   #8 (permalink)
Member
 
Join Date: Jul 2011
Location: Mississauga, ON
Posts: 63
Default

I've got the same thing... it releases from gear, but won't engage... I think I'm gonna bring this up when I go in next.
__________________
"When in danger, when in doubt, run in circles, scream and shout"
Acid4Life is offline   Reply With Quote
Old 01-26-2012, 10:22 PM   #9 (permalink)
Senior Member
 
Join Date: Jul 2010
Location: los angeles california
Posts: 262
Default

Is te noise at 4300 to 4500 it's like a chirping noise and it does it only at that time. Look at your pulley in the back and make sure it looks right I been fighting with Kia for the past 6 months on that noise and they first told me it was the exhaust shields so I removed them all and now they can seem to find the noise I tell them so I am going to take it in again so they can fix it I think it's the pulley and I'll make a video tomorrow and post it up to show you guys the noise it makes. Hopefully it will be the same noise and then we can figure out what it is and get it fixed.
Alfonso92503 is online now   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 05:07 PM.



Powered by vBulletin® Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.