2011 2.4L 6AT Turbo - First in North America - Thanks Drummer636!

[Koupsx4110]

For anyone wondering I contacted IPT in Hawthorne ,NJ about the 5 speed trans upgrades needed and prices.

"You would at a minimum want to have the valve body upgraded/modified,we can also rework the torque converter or a full build of the transmission,pricing would be as follows:


1) IPT Performance valve body upgrades/modifications. $489

2) IPT Performance torque converter rework/restall. $549

3) IPT Performance FULL transmission build (includes valve body work,but not torque converter) $3375"

[drummer636]

Koupsx, does this also work for the 6spd auto??? I want to beef up the engine for this car. Especially forge internals! Just don't know where to go for all this..?


Sent from my Autoguide iPhone app

[Koupsx4110]

You should be okay without these. I asked him what it would take to strengthen the 5 speed auto trans for max 10psi and he gave me that list. I'm sure if you email him and asked him about 10 psi for the 6 speed, he'd give you a smaller list because your trans already can handle a good bit of boost, not 100% on how much. I also cant see a reason why anyone would exceed what TK is telling you.

If you'd like an email address (sales@importperformancetrans.com), I believe his name is Ty, or at least he signed it as Ty lol

[aqrab]

so the 6 speed AT can handle the power

[aqrab]

so the 6 speed AT can handle the power

[SketchedOut]

Originally Posted by aqrab

so the 6 speed AT can handle the power

Yes, Drummer has a 6AT

[Koupsx4110]

Just be careful how's much boost your tuning to

[TurboKits.com]

Your forgetting the Mustang DYNO. These DYNOs are typically seen as low reading DYNOs or "The HeartBreaker" as they are called. We are getting the 6AT before and after percent by the 1st run. The car is rated at 173 from KIA and it ran 130 at the wheels. 130 / .75 = 173. So 232 / .75 (same ratio) gets you to 309.3, so us rating it at 300HP is actually underrating it

Originally Posted by Hooy

That is a lot of drivetrain loss! What do stock SX's dyno at? Most crank HP figures I see are calculated with ~16% manual and ~19% auto, but of course it depends on the particular trans. When I read 300hp, I really didn't think it'd be only 232whp but was expecting something like 260-270

Originally Posted by aqrab

so the 6 speed AT can handle the power

[Jerbou71]

The video won't play on my iPhone.

[TurboKits.com]

How funny is that, the video was taken by and iPhone! LOL... Anyway, I am not sure why, we modified it in the same software and posted it on youtube like all of our other vids?

Originally Posted by Jerbou71

The video won't play on my iPhone.

[jgshannon]

Those are some pretty damn impressive numbers I'm going to be picking up my '10 Koup SX in a week as long as nothing else catches my eye. I would definitely see myself doing this after the warranty is up.

[TurboKits.com]

Need a Facebook style "like" button.. LOL

Thanks for the interest, let us know if you have any questions in the meantime!

Originally Posted by jgshannon

Those are some pretty damn impressive numbers I'm going to be picking up my '10 Koup SX in a week as long as nothing else catches my eye. I would definitely see myself doing this after the warranty is up.

[aerosox]

guess this will void the warranty for the vehicle right?

[crock89]

Originally Posted by aerosox

guess this will void the warranty for the vehicle right?

Ofcourse not! Who told you that big lie!

[drummer636]

Originally Posted by aerosox

guess this will void the warranty for the vehicle right?

Aha. Of course it will. But I'm basically promoting my car in my area and they said they would look after me if anything goes wrong! I gave my dealership so much flipping business it's not even funny lol so I'm covered for warranty!😃


Sent from my Autoguide iPhone app