I was wondering does anyone know how to remove the drivers air bag.
Yes, I do need CC. I've been pulled over for doing 95 in 65. Whoops.@Albinomexi you need to read this thread...(I think I remember you mentioning wishing you had cruise for the work trips)
Doh! Trooper on i-5 I'm betting..probably between woodland and kalama? I have had a few close calls around there lolYes, I do need CC. I've been pulled over for doing 95 in 65. Whoops.
Sent from AutoGuide.com Free App
No. I-84. I was going to Pasco WA. The cop was hidden in the middle of the freeway divider. I actually maxed the forte out (115-117 MPH before governor kicked in). Lol.Doh! Trooper on i-5 I'm betting..probably between woodland and kalama? I have had a few close calls around there lol
Great Job Wendle and Kiatech - So to sum it up, for non heated steering wheels, itshere are the part numbers for the switches and wire you would need to do this for the switch you have 2 options 96710-7200 that switch also has the button for heated steering wheel on it. if you go with that switch you need to swap your trip switch that one has switch for true vision cluster on it no big deal only 4 screws to swap it that's the one I have. found it on ebay from korea its oem part I paid 95 for it found it for 75 after I ordered mine also on ebay. 96700-a7000 has just the cruise switch no heat button found it online for 118. 56190-a7100 is the extension wire you need I ordered mine online it was like 40 shipped. once I get lights to work I will post what led and resistors I used hope this helps anyone who didn't get cruise with there car.
This basically is a d.i.y. for 2014+ cruise install. All is included including part #s. Any questions about something specific just quote what's got you puzzled and someone will help ya out.Is it possible for someone (anyone that's smarter than me) to use this info to put together a step by step guide for installing the cruise?
I read through this thread and was wondering if you noticed if the forte lx, I assume, that you added cruise control for was pre-wired or not. I thought you guys said it was but there were a few conflicting responses as well. I appreciate your time.well the results are in good and bad. good I have cruise in my car now swapping the switchs worked the bad the dash lights for cruise are not working so the resistor and led will have to be put in but if you don't mind them not working then your good. everthing else works like its supposed to. disengages when you hit the brake and I went about 10 miles with it on and it held good and steady speed. later tonight I will put the part numbers you need to do this .I also want to thank kiatech manny for his help to
Hello Chris. Does cruse light on your dashboard work? What is the spec of your car? I own 1.6cc engine with 6 speed manual gearbox first gen Forte in Turkey. I want to activate cruise control. I just found the switches and clockspring on ebay. Do I need to order clockspring?I could not find anything on adding cruise to a forte that did not come equipped so I figured it out myself. It's very simple and takes just a few hours. first off I want to say, no ECM reflash is needed to make this work, simply make the wires and buy a steering wheel with cruise and you will be good to go. I posted pics of the diagrams I used and that should help, mainly what I'm saying is I have added cruise to my forte LX and if uou have technical know how you can too.
This is for the first gen^^^^^^