Kia Forte Forum banner
1 - 20 of 64 Posts

·
Automotive Lighting Experts
Joined
·
917 Posts
Discussion Starter · #1 · (Edited)
Forte Footwell LED Kit! RGBW Multicolor & Single color kits! Control w/SmartPhone App



Looking to add a little color to your Forte's interior? Diode Dynamics' RGBW Multicolor Footwell LED kits are the way to do it! By adding Diode Dynamics' LED strips under your dash, you can add RGBW color-changing ability to your Kia Forte's footwell area.

This kit is not just RGB, it is RGBW! That means there is an extra integrated LED chip that is specifically white in color, right next to the standard red, green, and blue LEDs. By using an RGBW controller, you can activate and control the white chip independently of the colors. This provides a much more uniform, pure, and bright white color than the traditional method of combining all RGB signals.

Our Bluetooth Controller will allow you to choose any color under the sun, including True White, directly from your phone! Our mobile app includes a wide variety of features including strobe and fade effects, preset colors, Camera Match, Music Sync, and much more. Our controller will also allow you to adjust the brightness of the LED strips. Any time you power up your strips, they will default to the last color that was previously selected.

These LED strips in this kit are highly flexible and waterproof. They feature high-density LED chips for brighter output and barrel-style M8 connectors for a secure connection.

Included in the 2-Piece Kit:

  • Two (2) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Four (4) zip-ties
  • One (1) 3M outdoor adhesive pad
Included in the 4-Piece Kit:

  • Four (4) 50cm RGBW SMD30 Strips
  • One (1) wiring harness (4-foot)
  • Two (2) quick splices
  • One (1) red LED toggle switch
  • One (1) DC-to-DT adapter
  • Eight (8) zip-ties
  • Two (2) 3M outdoor adhesive pads
  • Two (2) RGBW M8 extension wires


The 2-piece kit includes everything you need to install LED strips in the front footwell area on both the driver and passenger sides of your vehicle. The 4-piece kit includes everything you need to install LED strips in the front and rear footwell areas on both the driver and passenger sidse of your vehicle. This kit is very universal in nature and can be tapped into any 12V power source that you would like when installing.


Any questions email us at [email protected] or call: (314) 205-3033

PM us for the free-shipping code (U.S. forum members only)

Thanks!
Collin O.
 

·
Automotive Lighting Experts
Joined
·
917 Posts
Discussion Starter · #3 ·
I only wish I had known of your kit before I spent $120.00 on nearly the same contents individually for my cobalt ss. Until buying my Kia recently,I didn't know such a kit existed..I won't make that mistake twice!


Sent from AutoGuide.com Free App
Let me know if you need help in the future, sorry that happened to you :(

Nick C.
 

·
Registered
Joined
·
75 Posts
there anyway I can get these to flash w/ my speaker rings to my music? Sorry if this question was already asked, my phone sucks at navigating web pages. You guys know which wire that is on the back of the headunit?
 

·
Automotive Lighting Experts
Joined
·
917 Posts
Discussion Starter · #14 ·
Hey I need some help with installation. Right now everything is wired to the ignition, however I want these to come on when the doors open. Any suggestions?
You'll need to tap into either the map or dome lights, and possibly install a diode

If you send us an email: [email protected] we can provide you with more information and troubleshooting tips

Nick C.
 
1 - 20 of 64 Posts
Top