Kia Forte Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
i know that the 2.0t genesis coupe is a theta engine so one can/would believe that the turbo parts for that vehicle should bolt on with maybe some modification? has anyone looked into this?
 

· Registered
Joined
·
50 Posts
Discussion Starter · #13 · (Edited)
most companys dont change little things to keep cost down. i assume that the manifold should bolt on.... why make more part #'s if u can share parts keeps cost down. the most simple thing to do is compair exhaust gaskets to see if they line up on hell even have the same part number.

most stock turbo manifolds are a log style so you would have to make a custom down pipe to fit it.


i seen that companys make forged piston sets of it too

http://cgi.ebay.com/ebaymotors/Manl...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/Forged-86-5-mm-...=AU_Car_Parts_Accessories&hash=item45f3743870
 

· Registered
Joined
·
50 Posts
Discussion Starter · #14 ·
most companys dont change little things to keep cost down. i assume that the manifold should bolt on.... why make more part #'s if u can share parts keeps cost down. the most simple thing to do is compair exhaust gaskets to see if they line up on hell even have the same part number.

most stock turbo manifolds are a log style so you would have to make a custom down pipe to fit it.


i seen that a few companys make forged piston sets and rod for it too

http://cgi.ebay.com/ebaymotors/Manley-I-Beam-Connecting-Rods-Hyundai-Genesis-Coupe-2-0-_W0QQcmdZViewItemQQhashZitem519060c4d4QQitemZ350314611924QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/Forged-86-5-mm-Pistons-Hyundai-Genesis-Coupe-Turbo-/300437223536?cmd=ViewItem&pt=AU_Car_Parts_Accessories&hash=item45f3743870

Forte 2.0 exhaust gasket part number# 28521-25020 $15.07
genesis 2.0t exhaust gasket part number# 28521-2c400 $19.92

^^ i almost crapped when i got the 2nd part # untill she said ( C ), lol
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top