[littlejake]

Power distribution

2 - Kicker Battery terminals with 1 - 1/0 gauge and 1 - 4 gauge out
1 - 130 amp Circuit Breaker
1/0 gauge wire
Kicker Non-Fused Power Distribution Block (2 -1/0 gauge in and 3 - 4 gauge out)
4 gauge to all 3 amps
Kicker Non-Fused Ground Distribution Block (2 -1/0 gauge in and 3 - 4 gauge out)
4 gauge to all 3 amps

Signal Distribution

Flux 9 Conductor Speed Wire Speaker Wire
Contains enough wire strands for 4 speakers and a amplifier turn-on wire
4 - Channel Adjustable Line Output Converter
3 - 2 Channel Twisted Pair Hex Signal Cable (RCA Cables)
2 - 2 Channel Twisted Hex Y-Adaptor

Amplifiers

JL Audio 500/1 Mono Block Slash Series
JL Audio 300/2 2 channel Slash Series
JL Audio 300/2 2 channel Slash Series

Subwoofers

2 - JL Audio 12W3-D4 Dual Voice Coil

Speakers

2 sets - MB Quart PVI 216
6-1/2" Premium Series Component Speakers System

Enclosure

It’s a secret!!!! All I can say is that I will be itchy and it will be bright!!!!!!

Rewrapped alternator on the way along with a second Optima

 

[justinadams]

rewrapped? do you mean amped up power? if so? how many amps are we pushing stock?

 

[littlejake]

rewrapped? do you mean amped up power? if so? how many amps are we pushing stock?

Yes they actually take the stater out and remove the copper coil and rewrap it. I don't have the specs on the stock unit nor do I know what the new unit will be rated at. I told the guys to use as much as possible. I will read the amps when I get it in and keep you posted. I am thinking the stock unit is around 70-90 amps. I am hoping for 140 from the custom unit. You are held by the size of the case and the depth of the stater.

 

[LeShadow]

Yes they actually take the stater out and remove the copper coil and rewrap it.

Is'nt it made with the Alternator instead of the starter ? Or theyt really do it with the starter to ?

On my Élantra, the Alt was a 90 Amp one... it should be the same on the Forte.

A lot of good stuff u have there ! Do u make your enclosure by yourself ?

 

[littlejake]

Is'nt it made with the Alternator instead of the starter ? Or theyt really do it with the starter to ?

On my Élantra, the Alt was a 90 Amp one... it should be the same on the Forte.

A lot of good stuff u have there ! Do u make your enclosure by yourself ?

not starter...stater. actually I spelled it wrong it's stator

This make it easier

http://www.mtmscientific.com/rewind.html

 

[justinadams]

Yes they actually take the stater out and remove the copper coil and rewrap it. I don't have the specs on the stock unit nor do I know what the new unit will be rated at. I told the guys to use as much as possible. I will read the amps when I get it in and keep you posted. I am thinking the stock unit is around 70-90 amps. I am hoping for 140 from the custom unit. You are held by the size of the case and the depth of the stater.

ok cool.i was thinking of having this one. i wasn't sure what it was called. thanks. i've got a large amount of power and this would be very helpful. thanks for the info.

 

[littlejake]

ok cool.i was thinking of having this one. i wasn't sure what it was called. thanks. i've got a large amount of power and this would be very helpful. thanks for the info.

Cost me $100.00

 

[LeShadow]

[email protected] !!! My bad !



Thanks

 

[littlejake]

[email protected] !!! My bad !



Thanks

Its cool...no worries!!!

 

[justinadams]

Cost me $100.00

cool. i might do this then. though it'll prolly be a little different price locally.

 

[littlejake]

cool. i might do this then. though it'll prolly be a little different price locally.

I think you will be surprised. Good luck.

 

[cyberalex57]

sounds good...good luck

 

[justinadams]

on your enclosure are you doing wood or fiberglass?

 

[littlejake]

Its a Secret!!!!!!!!

 

[justinadams]

lol ok.

 

[cyberalex57]

lol