Kia Forte Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
536 Posts
Discussion Starter · #1 ·
So I want to run some lighting and few other accessories but I wanted to install a toggle switch w/ a fuse instead of splicing into everything...So I need to know 2 things...What do I have to do to get the additional push button switch that is not being used(see pic for example), the ones next to the to traction control to work. So that it pushes in and out like the traction control. Or is this not possible with those? If it is does anyone have a clue how to make it work? Right now it can't be pushed in or out.
 

Attachments

·
Registered
Joined
·
644 Posts
So I want to run some lighting and few other accessories but I wanted to install a toggle switch w/ a fuse instead of splicing into everything...So I need to know 2 things...What do I have to do to get the additional push button switch that is not being used(see pic for example), the ones next to the to traction control to work. So that it pushes in and out like the traction control. Or is this not possible with those? If it is does anyone have a clue how to make it work? Right now it can't be pushed in or out.
If I remember correctly someone had posted somewhere that they took theirs off.. I think its just a cover in the place of where the switch would be..
 

·
Registered
Joined
·
1,121 Posts
it is just a place holder for the switch for the fogs i think. you can drill into it though and mount the a regular toggle switch in it if you would like. someone else did that.
 

·
Registered
Joined
·
973 Posts
pop it out, mount a plate directly behind it with a button thick enough to be pushed in when you press the empty "switch". voila.
 

·
Registered
Joined
·
1,315 Posts
That is funny I have a different layout of switches from memory (from door to inside) Dimmer, Traction Control, Blank, Wiper Deicer. Page 2-2 of owners manual confirms this Switch layout.
 

·
Premium Member
Joined
·
1,020 Posts
That is funny I have a different layout of switches from memory (from door to inside) Dimmer, Traction Control, Blank, Wiper Deicer. Page 2-2 of owners manual confirms this Switch layout.
I bet your steering wheel is also on the wrong side than that picture above. :D
 

·
Registered
Joined
·
257 Posts
Fog lamps are on the column multi-function switch. No you cannot buy a individual OEM switch to fill the blank. You will need to drill out a blank and install your own switch..
 

·
Registered
Joined
·
214 Posts
Has anyone attempted this? I would like do do something like this or maybe even on the column switch if possible? I just want to be able to control my fogs lights with a nice look to it.
 
1 - 10 of 10 Posts
Top