Kia Forte Forum banner

Wheel Center Cap Removal

6976 Views 6 Replies 5 Participants Last post by  Ignite201
I wanted to know if anyone has tried the method shown in this link. I want to use the quickest way possible without taking off the tires. These are the center caps I'm going to use.

KIA FORTE KOUP 2010 WHEEL CENTER CAPS : eBay Motors (item 300411177845 end time Aug-22-10 19:28:31 PDT)
1 - 7 of 7 Posts
Yes, that works, but the stockers are obviously trashed after that.
Try a small suction cup. When I took my wheels off to remove my caps they popped out with very little effort at all! I bet a suction cup will do it:cool: Go to Wal-Mart or some other store that has a hardware dept. You can pick up a pack of small ones cheap (about a dollar and some change) they have ones with a little hook on them for hanging stuff to windows. Hope this helps.
Try a small suction cup. When I took my wheels off to remove my caps they popped out with very little effort at all! I bet a suction cup will do it:cool: Go to Wal-Mart or some other store that has a hardware dept. You can pick up a pack of small ones cheap (about a dollar and some change) they have ones with a little hook on them for hanging stuff to windows. Hope this helps.
Awesome idea! They do push out really easy from the back side of the wheel, so this might work.
I used a paint can opener. Basically a curved flat blade screwdriver. I'm sure a small flat blade would work just fine as well, just be careful not to damage the wheel. Those center caps pop right out.
the stock ones are 9 bucks to replace them... drill them:p
Thanks for all the input guys. I got some suction cups but couldn't get them to stick. I then decided to just grab the drill until Dvipercop mentioned using a flathead screwdriver & it came off without a problem. So Pharaoh I saved 9 bucks lol :D. I just finished all my rebadging tonight. Thanks to everyone for their suggestions.
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top