Kia Forte Forum banner

wheel spacer help

3625 Views 4 Replies 4 Participants Last post by  patyouknow
Is it safe to use wheel spacer? im plannin to add spacers of width about 15-20mm. Went to a local shop here, they sell USA made wheel spacers but only in 8mm and 5mm. It it okay to use two 8mms on each side? Another expensive option is to go with eibach wheel spacers. What is our hub center size btw? 67.1 right?
1 - 5 of 5 Posts
Wheel spacers are fine as long as you don't plan to do a lot of tracking. Also make sure that you get hubcentric spacers.

Lastly, we deal Eibach spacers (15 or 20mm) and we can get you the appropriate ones for your application. Just keep in mind that we can't officially sell you anything until our vendor account is activated sometime tomorrow. :D
PM-ed you
Wheel spacers are fine as long as you don't plan to do a lot of tracking. Also make sure that you get hubcentric wheel spacers.

Lastly, we deal Eibach spacers (15 or 20mm) and we can get you the appropriate ones for your application. Just keep in mind that we can't officially sell you anything until our vendor account is activated sometime tomorrow. :D
That's looks like an interesting brand of wheel spacers. Actually, my friend is planning to get some wheel spacers but he is not quite sure what brand should he get since we're both not familiar with wheel spacers. Anyway, we're gonna check out that hubcentric you were talking about. Thanks for the tip.
spacers are fine. i ran them on my jetta 16mm in rear and 8mm front.. nothing to worry about.

there are plenty of people who make them, search google for: 5x114.3 wheel spacers

that search should return some good info.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top