First Off remove headlight (Part 1)
Video curtsey of BigE
If the video isn't enough, here's the explanation
Video curtsey of BigE
If the video isn't enough, here's the explanation
HID install Compilation, All useful posts in one thread
noodile
121 - 140 of 143 Posts
Joined
·
162 Posts
So I'm looking online at ddmtuning.com and a lot of this is confusing, but I do know I want 6000k HID low beams.
Do I need one of thoes "error code" things? What exactly is a ballast? Do I need one? Basically, what would I need to buy to install these on my forte Koup? Thanks! (sorry for sounding like a dumbass)
Do I need one of thoes "error code" things? What exactly is a ballast? Do I need one? Basically, what would I need to buy to install these on my forte Koup? Thanks! (sorry for sounding like a dumbass)
Joined
·
1,990 Posts
A ballast controls the current going to the bulb, and yes it is essential. You get one for each bulb in the kits.
Read the first two pages of posts, and you'll be ready.
Joined
·
692 Posts
No drilling needed, pull back on the liner around the wheel well to get to it, then just pop in the new bulb, hook it up, and you're good to go
Joined
·
87 Posts
Does anyone know if you can just take out the battery in order to change out the bulbs. I probably wont go HID but want to at least change them to hyperwhites. Also, are there any DRL on the Forte. I am wanting to use an led strip as them but dont see any on during the day.
Thanks!
Thanks!
Joined
·
48 Posts
Thank U
Noodile... omg thank u so much for this thread! Diode Dynamics sent me an extra cable and it totally confused me. after viewing these pics and videos i "baked the cake" and now i have the best head lights in Austin, TX!
Why dont we have Thanks Button like on every other vBulletin based forum?
Noodile... omg thank u so much for this thread! Diode Dynamics sent me an extra cable and it totally confused me. after viewing these pics and videos i "baked the cake" and now i have the best head lights in Austin, TX!
Why dont we have Thanks Button like on every other vBulletin based forum?
Joined
·
3 Posts
Ok so we put DD fogs and low beams, 35W 4300 lights in my buddys 2010 Forte Koup, we used a relay on the fogs, connecting it directly to the battery, putting the 2 little connectors on the fog light side on the driver side, ran the wires and connected the balasts on both sides etc.
everything turns on, the drivers side the fog works perfect, on the passenger side it will flicker for 10-15 seconds before turning on all the way and staying on.
any solution to this or just kinda have to deal with it?
everything turns on, the drivers side the fog works perfect, on the passenger side it will flicker for 10-15 seconds before turning on all the way and staying on.
any solution to this or just kinda have to deal with it?
Joined
·
4,044 Posts
Joined
·
982 Posts
it might be a ballast or wiring issue. Try switching the ballast first to see if the problem occurs on the other bulb. If that doesn't change anything, it may be the harness. Disconnect the connector from the ballast on the problematic side and connect it to the other ballast so that the connectors (from the relay harness) are on different ballasts. Also, check your ground and any open wires.
Joined
·
3 Posts
okey dokey will do.
he called me and said it seemed to be working fine now (he left back down to killeen) but if it still has problems we can troubleshoot it.
thanks guys! im used to working on my genesis and didnt use a harness on that one so i was stumped.
he called me and said it seemed to be working fine now (he left back down to killeen) but if it still has problems we can troubleshoot it.
thanks guys! im used to working on my genesis and didnt use a harness on that one so i was stumped.
Joined
·
4,044 Posts
chances are you blew a fuse. check your fuse box, and if you used a harness, replace the fuse on there. some fuses can be blown even though they appear to be fine, so replace them just in case. its only like $3 for a few fuses.
Joined
·
146 Posts
Joined
·
146 Posts
That's what I thought it might be, just wanted to ask first so I can check all possible problems at once
Sent from my EVO 4G LTE
Joined
·
1 Posts
Where did you get that rubber seal for the dust cover. I just put hids on my koup is it ok to leave the dust cover off ??
Joined
·
60 Posts
Hey Kpac,
I would not recommend leaving your dust cover off. You risk having dirt dust, or condesation getting into your headlight which will cause problems down the road. I ordered my HID's from diode dynamics and the rubber seal came on the kit with the wires already threaded through. Im sure you could find them at any hardware store, or call DD and see if they can gice you some info on it.
Joined
·
1 Posts
The only problem i had before was when i drove through a puddle at 60 MPH, and everything was wet, but the car survived and there were no problems. The cause of the problem was drilling a 1.5 inch hole instead of a 1-inch hole in the dust cap.
Joined
·
6,246 Posts
Want to know who still has & uses DDM's HID's in their Fortes & do they still work? Been really wanting to buy HID's for the lows.
Joined
·
6,246 Posts
I know this is a very old thread/post but I have yielded & succumbed to HID's.
I'm wanting to order from DDM. Which HID kits would I need to make them function properly without any problem? What special plugs/wires/relays?
Been reading about doing the H11B to H11 & HID's. Which would be better than the standard low output H11B's? Been having low road illumination from the stock H11B's I end up relying on the high beams alot for night driving.
Their website is plain & lacking but can't beat the prices compared to the other most expensive HID kits for 2010 thru 2013 Fortes.
I'm wanting to order from DDM. Which HID kits would I need to make them function properly without any problem? What special plugs/wires/relays?
Been reading about doing the H11B to H11 & HID's. Which would be better than the standard low output H11B's? Been having low road illumination from the stock H11B's I end up relying on the high beams alot for night driving.
Their website is plain & lacking but can't beat the prices compared to the other most expensive HID kits for 2010 thru 2013 Fortes.
121 - 140 of 143 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
