Afternoon all,
I'm looking to completely replace majority of the front end suspension components on my 2011 Forte 2.0L. The car is coming up on 480,xxx km (~300k miles). I have never replaced anything with the exception of the sway bar links recently. I am also getting a fairly significant vibration while driving above 80km/h (50mph). Of course there are several different causes of this but I figure the suspension could use a refresh at this point anyways. I can't decide how many things I should be replacing but so far I was planning on the following:
Also toying with also replacing:
Has anybody done all of these components and can you recommend anything/give any tips if I should be doing anything extra? I'm not looking to put in an expensive/higher performance aftermarket - I just need something as good as OEM. I will likely purchase from Rock Auto for majority of these items. The only wheel hubs they have available at the moment are OEM (372$) and some 20-30$ ones which I assume are basically garbage. Any advice or recommendations on after market quality suspension parts?
Thanks guys,
I'm looking to completely replace majority of the front end suspension components on my 2011 Forte 2.0L. The car is coming up on 480,xxx km (~300k miles). I have never replaced anything with the exception of the sway bar links recently. I am also getting a fairly significant vibration while driving above 80km/h (50mph). Of course there are several different causes of this but I figure the suspension could use a refresh at this point anyways. I can't decide how many things I should be replacing but so far I was planning on the following:
- Inner/Outer tie rods
- Lower ball joints
- Control Arms
- Hub and bearing assembly (vibration issue?)
Also toying with also replacing:
- CV axles
- Strut tower/assembly
Has anybody done all of these components and can you recommend anything/give any tips if I should be doing anything extra? I'm not looking to put in an expensive/higher performance aftermarket - I just need something as good as OEM. I will likely purchase from Rock Auto for majority of these items. The only wheel hubs they have available at the moment are OEM (372$) and some 20-30$ ones which I assume are basically garbage. Any advice or recommendations on after market quality suspension parts?
Thanks guys,