Sadly idk if you can, but I’m really hoping so, cause that would be a sweet look. I’d do it if it works.

 

From looking at your picture above, I think it is very doable to attach this wing to your Forte with minimum modification to the wing.
If you can purchase this wing from a dealer that will let you return, you might just want to buy it and dry fit it to see if this will work.
There are 2 area that I am a bit concern on:
1. The trunk lid for Forte is very flat vs the Civic. I am not clear if the 2 attaching points of the wing is fitted to the flat part of the civic trunk or the contour part. I hope that the 2 attaching point of the wing also follow the same flat surface of the Forte trunk. If not, it will not sit flat to the trunk due to wrong angle. You might have grind it down to match the angle and the Forte flat trunk.
2. More importantly is the wind aerodynamic load for the wing. You want to make sure you beef up your trunk at the 2 points where you attach this wing. If not, when you driving fast, due to the wind pressure/load, it could deform your trunk lid or worse, the wing might detach from your trunk and fly off. That is one big wing there.
Post a picture if you decided to install it in your car. Goodluck.

 

I like that one, but I was actually thinking of one a little smaller to not run into that aero issue. Airdesign makes a lip spoiler for the 3rd gen forte, but it’s not the same. It doesn’t bolt on. It used an adhesive to attach at the corner of the trunk lid(above)

 

Okay thank you. Im still thinking if im gonna put spoiler or not

 

Try to find a local shop that has that in stock and test fit it. Unless someone has done it there's too much speculation.
Sometimes when I go car shopping I'll check out what aftermarket parts are available for it. The Forte isn't exactly a hot ticket item like the Civic, i30, or Veloster, so mods for it are little. In fact most mods for the Forte are mods for the other models that just happen to fit the Forte as well.
Otherwise if you have the money just gonna have to experiment to see what fits and what doesn't.

 

Try to find a local shop that has that in stock and test fit it. Unless someone has done it there's too much speculation.
Sometimes when I go car shopping I'll check out what aftermarket parts are available for it. The Forte isn't exactly a hot ticket item like the Civic, i30, or Veloster, so mods for it are little. In fact most mods for the Forte are mods for the other models that just happen to fit the Forte as well.
Otherwise if you have the money just gonna have to experiment to see what fits and what doesn't.

I saw post here that has a mugen wing its a forte GT though so i was asking him if he did something to the spoiler to fit it. Btw thank you i might just go with a lip spoiler

 

Make sure to check that this spoiler is large enough to cover the big square holes in your trunk BEFORE you remove the factory spoiler!!!!

I Hate to be a debbie-downer - but I think you're going to find it doesn't. Hope I'm wrong...

Appreciate the advise! I checked it out, its placement starts right where the OEM unit does on the top, the sides meet righ up to the edge of the trunk like the OEM unit and on the back side it comes over the top edge just slightly. Kind of hard to explain, but its foot print is just slightly larger than the OEM unit, roughly the same front and side coverage, with a little more coverage on the back. I would've just threw it on myself, but I want it as flush as possible and painted better. My local shop is super fair priced and will hook it up for $150 if I do the prep!

 

Appreciate the advise! I checked it out, its placement starts right where the OEM unit does on the top, the sides meet righ up to the edge of the trunk like the OEM unit and on the back side it comes over the top edge just slightly. Kind of hard to explain, but its foot print is just slightly larger than the OEM unit, roughly the same front and side coverage, with a little more coverage on the back. I would've just threw it on myself, but I want it as flush as possible and painted better. My local shop is super fair priced and will hook it up for $150 if I do the prep!

Good luck! I ordered x2 spoilers. That one and another one that had a larger top foot print. After I pulled off the factory spoiler and fitted that one, it didn't cover the holes for me. When it sits at the edge but the top part just didn't have enough surface area to cover the square holes, which are quite sizeable. Luckily I had the 2nd spoiler on hand because I destroyed the factory spoiler during the removal. Lol.
Those spoilers are made in China where they don't have a GT variant so don't have to worry about the GT OEM lip.

 

Hi, anyone who know if you can put this spoiler on 2019 kia forte lxs? Thanks

Have you seen Bigturboforte's wing? Here is a linky. It's a 06-11 Honda civic Mugen wing. I think it looks similar to what you are after.

 

Hi, anyone who know if you can put this spoiler on 2019 kia forte lxs? Thanks View attachment 81360

Edit: I just saw the guy above this post, my b🙄

I know theres a guy on here with that wing. I think its bigturboforte or something like that. He's in one of the new to Forte Forums

 

Yeah i saw it its the 06-11 mugen wing

 

Just fitted this duck tail on last week that I got off AliExpress. It's not bad, although I wish it was a bit more toned down. But at least it covers up the holes left behind by the factory GT spoiler. Stupid Kia.

 

Which spoiler is this? I love it

 

Yes the Factory offers one, I actually have one in my stock that I took off a Forte GT Line on a project Forte we built in my Shop you will have to drill holes into your trunk and find out if you can get seals from the parts dept to prevent water from getting into the holes you drill out its brand new has all the hardware minus the seals and instructions

 

Yes the Factory offers one, I actually have one in my stock that I took off a Forte GT Line on a project Forte we built in my Shop you will have to drill holes into your trunk and find out if you can get seals from the parts dept to prevent water from getting into the holes you drill out its brand new has all the hardware minus the seals and instructions .

 

For reference this is the 2nd spoiler I luckily had when the 1st one didn't fit. This one is a bit more flush at the back, but the top side is a wider to cover up the holes.

Trunk Deck Lip Spoiler for 07/2018 ~ 2020 KIA Cerato 4door Sedan Choice 1color | eBay

Easy install with 3M backing Tape backside. and we will be glad to assist you as quickly and efficiently as possible. G-315 : Aurora Black Pearl.

www.ebay.com

 

Yeah they stole my pictures as well for the carbon fiber version. Most popular pictures I've ever taken haha.

 

My wife's 2010 Forte sedan SX was pictured in ebay spoiler ads for 10 years. Copper color and top of her head poking out of the door opening. They finally stopped using it a few years ago...